Stepper motor DC-280 series（A,B）

porducts list

Fitness & Body Building [2]
Other Power Supply Units [1]

contact datails

Changzhou dechang electrical appliance factory

Larger photo of Stepper motor DC-280 series（A,B）

Stepper motor DC-280 series（A,B）


company	Changzhou dechang electrical appliance factory
Categories	LED Displays
Update	2011-01-11
Original Region	China
prev 1 2 3 4 5 6 7 8 9 10 next

Stepper motor DC-280 series（A,B）

DC-280 series（A,B）

Product Model:DC-280 series（A,B）

：AC20V～220V
：3～7A

7A85BYG、86BYG、90BYG、110BYG、130BYG


AC		～ 110V220V
AC		～ 110V220V
	A1	A	A
	A2	A
	B1	B	B
	B2	B
CLR		零
CW
CP
+5V		+5V	ENCWCP
ALM

：3
1、DC-280A：220V
2、DC-280B：110V
3、DC-280C：220V30V～120V

Signal Requirement

The DC280 drive is controlled by single impulse (common cathode/anode). Cp, Cw, Clr is separated by the optical coupling. The current should be at least 5mA to make sure the optical coupling well work. The current-limit resistance inside the optical coupling is 1K, +5V power level. It can add resistance to limit the current as you required when the input voltage is higher. e.g. The input power level is +24V, it should connect in series with 2K resistance in each signal. If the input power level is +12V, t should connect in series with 1K resistance in each signal.

Signal
Current Selection

l、 It had better to specify when place the order,
usually the setting is 7A
2、Please follow the below if customer has to change
the current temporarily:

Open the frame after shut off the power, and then press the red switch as the table, and then turn on the power to work.